Data Consumption for Video And Gps Devices

Data Consumption for Video And Gps Devices

Video Devices

This article outlines the expected mobile data usage for video-enabled devices (MDVRs, dashcams, multi-channel video recorders)  and data comparison with trackers

1. What is the average consumption of data per video device?

✅ On average, a video device consumes around 400–500 MB per month.

 2. What is the minimum data usage we expect?

✅ The minimum expected consumption is around 300 MB per month, assuming normal GPS reporting and minimal remote video access.

 3. What is the maximum data usage a video device can consume?

✅ In most cases, video devices use a maximum of around 750 MB per month.
⚠️ Note: A few units with issues (misconfiguration, repeated retransmission, or excessive live viewing) may exceed this value.

 Key Notes for Video Devices

  • Live streaming and remote playback increase data consumption significantly.

  • Alarm video snapshots also add to usage if enabled.

  • If video streaming is disabled, usage stays closer to the average (400–500 MB).

  • If video streaming is used frequently, consumption may exceed 1 GB.

Troubleshooting High Data Usage

If a video device consumes more than expected:

  1. Check configuration – Verify GPS reporting interval and video alarm linkage.

  2. Review platform usage – Confirm how often live streaming/playback is requested.

  3. Inspect device logs – Look for repeated uploads (looping alarms, corrupted files).

  4. Update firmware – Ensure the device is on the latest stable version.

Data Consumption Comparison: GPS vs. High-Report GPS vs. Video Devices



Device Type

Minimum (MB)

Average (MB)

Maximum (MB)

Notes

Standard GPS Tracker

~30–50 MB

~60–100 MB

~150 MB

Low usage. Location + telemetry only (every 30–60s).

High-Report GPS Device

~120 MB

~150–250 MB

~300–400 MB

Sends frequent reports (every 5–10s). Can be 3–5× higher than standard GPS.

Video Device (MDVR/Dashcam)

~300 MB

~400–500 MB

~750 MB (up to 1GB with streaming)

Includes GPS + snapshots + alarm video + optional live video stream.

    • Related Articles

    • Video Monitoring

      Video telematics It refers to the integration of video technology with telematics systems to monitor vehicles and drivers. It combines video footage with data collected from telematics devices, such as GPS, speed sensors, accelerometers, and other ...

    • Teltonika DualCam Configuration (FMC650)

      FMC650 DualCam Configuration (!) Required firmware version - 03.00.14.Rev.114. Firmware errata. Firmware download for FMX125/FMX225/FMC650 Link: Firmware Password: 3RpOAf96 It is necessary to change Data Protocol to Codec 8 Extended In RS232 \ RS485 ...

    • Howen dashcam/mult channel video device

      You can connect to the device hotspot then configure the device according to your preference. Ensure the device is set to H protocol and the following settings Gps data server ::: Server : data.gpsiot.net port : 8933 Media server details ::: Ftp ...

    • Teltonika DualCam Configuration ( fmc 125/225)

      FMX125/225 configuration Please make sure to download the latest DualCam FW version. The latest FWs can be downloaded from the following Wiki page — DualCam Firmware errata Firmware download for FMX125/FMX225/FMC650 Link: Firmware Password: 3RpOAf96 ...

    • Howen Configuration Procedure Via Mobile app ( Howen iTool new firmware)

      A. Quick setup. The Howen iTool application is used to configure the device in this guide. To point the device to your whitelabel platform, follow the steps below: 1. Download the Howen iTool here 2. Connect the dash camera to your mobile phone's ...