How do I set up bluetooth temperature sensor (coinT, puckT, Tzone)

1 . ensure that all the io on the device are enabled. you can use SMS or 

 

 2.add the inputs to to the app

 

 

3.now on the app you can set up the temp seonser  on admin>>clients>>demo client>>hdware devices>>io & sensors

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Related Articles

• How do I set a Geolock alarm

  ***** This is a device/hardware specific event ****** for the case of a teltonika device , on the configurator ensure that the auto geofence parameter is set and its attributes set as shown below                                                  log ...

• Configure Inputs, Outputs & Sensors

  This article gives an overview of how to configure different types of inputs output and sensors You may want to create a fuel or temperature sensor mapping, add an engine cut off output, or map an input like door open close   First you must add the ...

• Inputs, Outputs & Sensors

  Click on ADMIN and navigate to CLIENTS. Select your client. Click on INPUTS, OUTPUTS & SENSORS . Click on the ADD NEW button to add a new inputs, outputs and sensors Enter the input, output, sensor master details in the form. This include: ) Name ...

• Assigning asset and Simcard to a device

  In order to assign an asset to a device, click on admin> client> devices and select the required device then assign/set the asset and the SIM card for the device.

• How do I adjust the odometer/mileage of an asset

  This article gives an overview of how to update the odometer or mileage value on the app or how to synch the odometer value with the one in the vehicle. Click on asset info under asset info select manage mini-tab on the odometer section in the manage ...