Howen configuration procedure
To access this page via web.
ensure the camera is connected to the same wiff as your pc.
connect tot he cameratespot and read the camera ip ..
use the ip on your browser.
you will land on the page below ..
the first option is configure the server and port for both camera and gps traffic
1. navigate to Network>> center
2. update the server settings on center-1
3.update the ftp settings
4. update the storage settings
5. update the alarm info .. to enable us get event based
Related Articles
Howen dashcam/mult channel video device
You can connect to the device hotspot then configure the device according to your preference. Ensure the device is set to H protocol and the following settings Gps data server ::: Server : data.gpsiot.net port : 8933 Media server details ::: Ftp ...Video Monitoring
Video telematics It refers to the integration of video technology with telematics systems to monitor vehicles and drivers. It combines video footage with data collected from telematics devices, such as GPS, speed sensors, accelerometers, and other ...Jimi IoT Dashcam Configuration - JC261 & JC400 Series
The Jimi IoT JC261 & JC400 dashcam is a capable 2-Channel (Front + Cabin) dashcam with GPS Tracker functionality It can be configured to deliver video events to the platform, you can request Live or Historic video as well as use it as a tracking ...Teltonika DualCam Configuration ( fmc 125/225)
FMX125/225 configuration Please make sure to download the latest DualCam FW version. The latest FWs can be downloaded from the following Wiki page — DualCam Firmware errata Firmware download for FMX125/FMX225/FMC650 Link: Firmware Password: 3RpOAf96 ...Teltonika DualCam Configuration (FMC650)
FMC650 DualCam Configuration (!) Required firmware version - 03.00.14.Rev.114. Firmware errata. Firmware download for FMX125/FMX225/FMC650 Link: Firmware Password: 3RpOAf96 It is necessary to change Data Protocol to Codec 8 Extended In RS232 \ RS485 ...