INSTALLER MODULE -Technician Installation Module

INSTALLER MODULE -Technician Installation Module

The Technician Installation Module refers to a specialized system or toolset designed to guide and assist technicians during the installation of hardware device in assets.  It assists in Testing and Validation on instalations depending  onthe set out criterion.


Step 1:   Create installers

installers are reseller users of type technician. refer to the link below on how to create a reseller user.







Step 2: create the assets and devices on the app.   Caution you need not to use the Add Asset Wizard.
(The assets  and devices  needs to be added separately as they need to be available for utlization on the installation tab)






step 3: create the installation  on the modules tab 







1. select the asset .
2. add the name  of the contact persion  who is with the asset to be installed.
3. add the address where the vehicle is.  and the phone no.
4. select the installation date .
5. assign tech assign technician if one is available other wise leave the option unchecked and select the testing permision .
6. select the criteria for sucessiful installation.



Once done save installation .  the installation i available onthe technisian account.

all the above is done by the Office admins.   The technicians have the devices  but added to the system .


The technician interface . 

When the technician logs in he will only see the insallations assigned to him and the once created and no tech is assigned so they can self assign to themselves 



they need to click on install / select the asset/vehicle to install  and click on 'assign imei'




Afther the wiring and installation is done click on install again to expose the task window .  choose if you will use stale data to test or do a live test .

for a stale data testing choose the period   the criterial will sample the data from 

for live testing   click on live testing then action the testing parameters e.g put the ign on, off etc 


then click on Run 









if one or more parameters did not pass   you will get a prompt notifying you of not sastifying the criteria


please check your installation and re-run the test  untill all are passed





    • Related Articles

    • Maintenance Module

      A Maintenance Module is essential for ensuring fleet vehicles and heavy machines are properly maintained and operational. here are the core features of this section A. Maintenance Scheduling Set periodic maintenance schedules based on mileage, engine ...
    • Platform user manual

      A. Map Page The Map page is the default page on login. This is where you do all your basic monitoring of vehicle positions and statuses. From this page you can select assets. This centers and zooms the screen to show the unit in detail with an asset ...
    • How do I create workmodes

      Workmodes 1. click on Admin >>>reseller settings>>templates>Add 2. Add the work mode name e.g Unauthorized select the color you need for the work mode, then save 4. available work modes Now that the work modes are created you need to map them to the ...
    • Device quarantined, fair use policy quota exceeded - why do I see this message?

      Summary. Something isn’t quite right — your device is sending an excessive amount of data. To protect system performance, we have temporarily quarantined your device. At 00:00 UTC (midnight), the daily quota resets and we will resume saving your ...
    • Why Are My Trips Not Showing?

      Why Are My Trips Not Showing? Summary: "Trips" are generated when there is an ignition on and then off and an asset moves from point A to point B. When viewing the Trips page, you should see a list of trips in the Trips Panel. If your Trips page is ...