Send SMS/GPRS Commands
This article shows you how to save and send Device commands
Go to ADMIN.
Scroll to GPRS & SMS COMMANDS in the middle sub-menu
The n select the command type you want to add.
The n select the command type you want to add.
On the Left, go to hardware, save the command and its description and check the box Show on Asset Info
From this point you will be able to save GPRS or SMS commands
To send the command go to Client-select Asset-Asset Info Page-Command Tab -HARDWARE SMS/GPRS COMMANDS. Alternative send a customer command from the same page
N.B. SMS COMMANDS WILL NOT WORK IF YOUR SMS GATEWAY IS NOT CONFIGURED. Click here for more information on connecting an SMS Gateway with our platform.