Teltonika FM/FMA Series

Teltonika FM/FMA Series

This article explains the 3 ways to activate your Teltonika device.

1. Using the Add Asset Wizard within the web-app

This is the easiest but least reliable way to configure your devices (due to factors outside of our control). Click here for more info on Add Asset Wizard.

2. Configuring your device manually using the Teltonika Configurator (Windows software)

Find a selection of configuration files at the bottom of this article.  

N.B. You must input your own APN settings for your GSM/SIM provider into our standard configuration file.

3. Over The Air (OTA) via SMS & GPRS

To connect the device to our server OTA, firstly an SMS command needs to be sent. Then the rest of the configuration commands can be sent via GPRS from within our app. See here for more info on sending SMS & GPRS commands

• Ensure you start the initial SMS command with two spaces if the device has no username and password. This is the factory default setup .

• Ensure that you change the APN details in the command.

- Here is an example using APN settings with no APN username & password:

APN name: internet
APN username: blank
APN password: blank

Example commands:

setparam 1242:internet

setparam 1245:data.gpsiot.net

setparam 1246:12070

setparam 1247:0


- Here is an example using
APN settings with an APN username & password:
APN name: safaricom
APN username: saf
APN password: data

Example commands:

setparam 1242:safaricom

setparam 1243:saf

separam 1244:data

setparam 1245:data.gpsiot.net

setparam 1246:12070

setparam 1247:0

 Once the above commands has been sent via SMS, and the device is connected to our platform, then GPRS commands can be sent.  Here is a list of GPRS commands that can be sent and what they dohttps://docs.google.com/spreadsheets/d/1Yhx9UQx31z-HAM8MPUU9rgIKONc9meXDWeuxp9RhC4I/edit?usp=sharing

 

N.B.

The ignition should be kept on whilst sending GPRS commands for them to take effect quickly.

Sending ONE SMS at a time applies for these series of hardware devices.

 

    • Related Articles

    • Teltonika FMB/FMC & Other Series

      This article explains the 3 ways to activate your Teltonika device. 1. Using the Add Asset Wizard within the web-app This is the easiest but least reliable way to configure your devices (due to factors outside of our control). Click here for more ...
    • Teltonika DualCam Configuration (FMC650)

      FMC650 DualCam Configuration (!) Required firmware version - 03.00.14.Rev.114. Firmware errata. Firmware download for FMX125/FMX225/FMC650 Link: Firmware Password: 3RpOAf96 It is necessary to change Data Protocol to Codec 8 Extended In RS232 \ RS485 ...
    • jimi dashcam Configuration - JC261 & JC400 series

      The Jimi IoT dashcam is a device designed for vehicle monitoring and surveillance. It combines a dashcam with Internet of Things (IoT) capabilities to provide enhanced features and connectivity. To start first ensure we have the desired /recommended ...
    • Teltonika DualCam Configuration ( fmc 125/225)

      FMX125/225 configuration Please make sure to download the latest DualCam FW version. The latest FWs can be downloaded from the following Wiki page — DualCam Firmware errata Firmware download for FMX125/FMX225/FMC650 Link: Firmware Password: 3RpOAf96 ...
    • Configuring EYE beacons And Adding them to the platform

      EYE App Configuration Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:• Transmitting at 2 dBm power. • Data advertising at 3 second intervals. f you would like to change these settings you ...